Dynab-4 - Destroy Relentless (fn)

Walkthrough

NOTE: Make sure you leave all your equipment in a safe place before you attempt this mini. If the Chimaera gets blown up with you still on it, then you will forfeit all your belongings.

You should install the power core relay before jumping to the Dynab system. The technician roaming level 3 and 4 has it, then go to the chief engineer's room, press the button there to deactivate the systems, go south and install the power core relay. This will increase the ship's weapon strength, without it you will have a very difficult time with this mini.

After that is done, return to the captain's chair and <enter dynab>, then <pull lever> to jump to the Dynab system. Set your speed to 500, wait until you get a reasonable distance between you and the Relentless (between 4000 and 5000), and then stop. The proton torpedoes have a range of 500-5000, so this is perfect.

Now you can execute the following alias, alias #1, to engage the Relentless and trigger the space combat:

aim relentless
shield on
report
equipment
scan relentless
scan bellicosa
fire proton
evasive gamma
	

Very soon another ship, the Bellicosa, will join the fight. Now you should look for the following text:

Chimaera flight computer: Maneuver gamma executed.
	

When you see that, execute alias #2:

shield on
report
equipment
scan relentless
scan bellicosa
fire proton
evasive gamma
	

Now keep executing alias #2 until the Relentless is destroyed. You could have a trigger prepared for the text:

[1] Bellicosa/Commander: We shall avenge your deaths, Relentless.
	

And have it execute the command <aim bellicosa>. Then you can continue with alias #2 until you destroy the Bellicosa as well.

If things go badly, you can escape from the ship by going 2s, d from the captain's chair, and then pull lever to use an escape pod. If the other ships manage to destroy your proton torpedoes, you will have very slim chances of completing this mini. But there are always second chances.